Feel the difference! A perfectly aligned arrow is the key to your success. With the Arrow Spinner from Sport-Produktion, you're in control. Smooth-running ball bearings reveal even the smallest irregularities and help you unlock your full potential. Crafted with passion for archery by Sport-Produktion.

Cresting machine

complete including motor, voltage regulator, counter bearing,

3 Nockadapter,

(1 each for Beiter Pin Nock, Competition Nock, Universal Nock)

6 marker pins, 2 design card holders with magnets

1 acrylic paint set with 6 colors and a brush.

The counter bearing can be moved freely on the base rail and is therefore adjustable to all arrow lengths up to 33 inches.

The center bearing, which functions similarly to a steady rest on a conventional lathe, can be adjusted in height to the shaft diameter and is also freely movable along the base rail. This reduces excessive vertical movement during painting and allows for more precise painting.

The two included design card holders can also be moved freely on the base rail and hold your own design cards with the included magnets.

The 6 supplied marking pins can also be freely moved on the base rail as additional markers.

Arrow rest. Can be used for arrow building and/or cresting. Arrow shafts rest securely in the designated recesses.

Frame material printed from PETG,

Distance is aluminum.

Delivered disassembled. A 3mm Allen key is required.

For multiple orders, the shipping costs will be adjusted accordingly and you may receive a refund. For orders from a country outside Germany or from an island, additional costs may apply.

Disc nails printed from ASA, ABS or PETG leftover material from other orders, color-mixed with a galvanized wire nail

Such a low price is possible because we use leftover materials!

Howling arrow attachment printed from TPU available as a set in 3 sizes. 3 howling arrow attachments for arrows with a diameter of 5-6mm, 6.7-8mm or 9-10mm or assorted one attachment of each size. TPU is very impact-resistant and has properties similar to rubber, so it adapts to the arrow size as much as possible.

When the arrow hits the back stop, the hay attachment slides back on the arrow shaft and can be easily removed from the drawn arrow. It can then be used again. Colors vary depending on what's available.

For multiple orders, the shipping costs will be adjusted accordingly and you may receive a refund. For orders from a country outside Germany or from an island, additional costs may apply.

With the shaft end grinder you can bring the shaft end of the arrow back into the right angle after shortening it.

This is necessary to ensure that the nock, pin or bushing sits straight.

Course number plates and direction arrows printed from ASA (weather-resistant) sign color white with black lettering

License plate course

1 set of numbers from 1-15 / 1-30 / 1-45 / 1-60 / 1-75 / 1-90

The set consists of 3 colors:

White with black letteringBlue with white lettering

Red with white lettering

including screws for fastening made of stainless steel

Pay easily, quickly and securely online now – withCurrently approx. 14 days delivery time

Our newly developed Spine Alignment Measuring Device Light is a more affordable solution with a lightweight design. It offers all the features of the standard device without any limitations, but is lighter and more affordable. The mounts are not milled and made of aluminum, but are 3D-printed and made of plastic.

Variable adjustability

The knurled screws make quick adjustment on the groove profile quick and easy!

Universally applicable, short or long arrows can be measured quickly and easily!

Determine equality of arrows

When measuring, the equality of the deflection of all measured arrows is determined as a side effect!

Check concentricity

During arrow building/tuning, check the concentricity of the glued-in components!

or check the concentricity of used arrows and compare them!

Determine spine alignment

Determine the hard/soft side of the arrow by simple and quick testing!

Better groupings

As an ambitious archer you are always looking for the best arrows, you try to build arrows so that they are exactly the same, with the Spine Alignment Measuring Device Light it is just as easy and inexpensive to find the so-called hard spot in the arrow.

The groupings can clearly be improved.

1 Spine alignment measuring device light is 199,95€ including dial indicator (0,01mm)

Pay easily, quickly and securely online now – withCurrently approx. 14 days delivery time

With our newly developed arrow measuring device, arrow tuning is taken to a new level.

Variable adjustability

The quick-release levers allow quick adjustment on the groove profile quickly and easily!

Universally applicable

Short or long arrows can be measured quickly and easily!

Determine the equality of the arrows when measuring, the equality of the deflection of all measured arrows is determined as a side effect!

Determine spine alignment

Determine the hard/soft side of the arrow by simple and quick testing!

Check concentricity

When building/tuning arrows, check the concentricity of the glued-in components or determine and compare the concentricity of used arrows!

Better groupings

As an ambitious archer you are always looking for the best arrows, you try to build arrows so that they are exactly

are the same, with the spine alignment measuring device it is easy to find the so-called hard spot in the arrow.

The groupings can clearly be improved.

1 piece Spine alignment measuring device is 299,95€ including dial indicator (0,01mm)

Pay online now easily, quickly and securely – with

Currently approx. 14 days delivery time

(please order separately if required)

3D printed and filled with 2lbs of weight to accurately determine the spine of the arrow.

The scope lighting is for a Viper Scope 1 3/4"

The delivery includes the lamp including batteries, the base is made

in 3D printing and a 10-32" hexagon socket screw for attachment to the scope.

The lamp is switched on by turning the lamp

switched on and off.

Package contents:

1 lamp, 1 molded part and 1 cylinder head screw 10-24

The paper tuning frame offered here is suitable for A3 size sheets.

The very strong magnets hold the paper firmly on the frame even after multiple shots.

There is a 1/4"-20 UNC thread on the bottom, making it suitable for most photo tripods.

The tripod is not included in the price.

printed from TPU

Made using 3D printing technology from green TPU.

TPU is a very impact-resistant material and is very suitable as a tendon stopper.

Other colors available on request.

Inner diameter approx. Ø9.5mm.

A tendon stopper is included.

3D printed with connector (without transport tube)

Arrow separator for transport tube 12-fold different arrow diameters

for arrow diameters Ø4-6mm, Ø5-8mm or Ø7.5-9.3mm

Arrow separator for transport tube 24-fold

for Ø5-5.5mm arrow diameter

This also holds the arrows in a transport tube and separates them.

An order can also be placed via info@sport-produktion.de!

!!!German islands and countries outside Germany shipping on request!!!

Arrow cutter 24-way for arrow diameter Ø5-5.5mm

Scale attachment for weighing arrows and accessories,

turned from aluminum and plastic.

With the scale attachment for arrows and accessories, a wide variety of diameters can be weighed precisely, as they can be placed centrally on the scale.

They don't roll down.

The scale attachment is supplied as a set with 5 different inserts.

The following inserts are included once per scale attachment:

Inner diameter Ø5.0mm, Ø6.5mm, Ø8.0mm, Ø9.5mm and Ø11.0mm

Scale attachment for weighing arrows and accessories

from the 3D printer including precision scale

(Colors for the attachments vary)

The 3D-printed scale attachment for arrows allows for precise weighing of a wide variety of diameters, as they can be centered on the scale. They won't roll off. The cone is held in place by magnets on a specially attached metal foil.

The scale attachment is supplied as a set with 5 different inserts.

The following inserts are included once per scale attachment:

Inner diameter Ø5.0mm, Ø6.5mm, Ø8.0mm, Ø9.5mm and Ø11.0mm

The string angle allows the arrow rest of a compound bow to be adjusted quickly and easily in height.

The string angle is held in place by the O-rings on the string, leaving your hands free to adjust the arrow rest.

Recesses at the nocking point and in the peep area allow adjustment without obstacles.

The string angle is designed for large compound bows, but can easily be reduced using a jigsaw, for example!

An order can also be placed via info@sport-produktion.de!

!!!German islands and countries outside Germany shipping on request!!!

Arrow cleaning cloth for gently cleaning the arrow. Cleaning cloth is supplied with a zipper.

Extension length approx. 0.5m

with key ring